SCATT WS1 (set)

Name: SCATT WS1 (set)
SKU: 4100
Price: 1440.00 EUR
Availability: BackOrder

1.440,00 €

incl. 19% VAT plus shipping costs

For training on stationary targets at distances of 5–10 meters and for simulating shots up to 1,000 meters with air guns, small-caliber or large-caliber firearms, bows, crossbows, and other types of weapons.

Artikel in kürze lieferbar! Item Available Soon!

SKU: 4100 Category: SCATT Sets

Description
Additional information

SCATT WS1 is an electronic training system with a wireless optical sensor designed for training with fixed targets. This specialized dry-fire trainer is intended for indoor use. It can be used at actual distances of 5 to 10 meters, with a simulated range of up to 1,000 meters.

The training system comes with an electronic target frame (the electronic target can be mounted on a wall, a bullet trap, or a camera tripod). The target connects to the control unit and does not require a separate power source. Special slots on the target frame are designed to hold paper target prints that have been scaled using the SCATT software according to the intended range and exercise.

The electronic target frame can be used at distances ranging from 5 to 10 meters, allowing you to train in different rooms with a single device. There are two sets of LED indicators at the top and bottom of the target, designed for time-limit training—with time limits for each shot (e.g., in match pistol shooting).

Wireless optical sensor – Model: WS-03 – The sensor is designed to register all gun movements during the pre-shot phase and while the shot is being fired (trigger pull). The sensor weighs 30 grams (including mounting hardware) and has virtually no effect on the balance of the firearm of your choice. The optical sensor automatically detects the distance to the target (provided the distance is between 5 and 10 meters).

The SCATT software enables a convenient calibration process, ensuring that the sensor’s axis and the firearm’s sight are correctly aligned, thereby sparing the user any challenges related to sight adjustment. Furthermore, the sensor automatically compensates for the “drift effect” to the point where this issue is permanently eliminated!

The sensor has a built-in rechargeable battery and can be charged via a PC’s USB port; the battery is fully charged in 1.5 hours. The built-in battery guarantees up to 30 hours of continuous operation or approximately 10,000 shots with an average aiming time of 10 seconds. When idle, the sensor automatically switches to power-saving mode.

A trigger sensor model: SCATT WTS can be connected to the USB port of the WS-03 model.

The system comes with modern, user-friendly, and functional software—SCATT Professional. It includes all the necessary features for training and analysis at the highest level.

Specifications:

For indoor use
Distance to the electronic target – 5 to 10 m
Optical sensor type – wireless (two-way infrared connection to the electronic target)
Optical sensor dimensions: 27 x 19 x 60 mm
Optical sensor weight: 30 g
Software – SCATT Professional (for Windows)
Limited two-year warranty

Included in the package:

Optical sensor model WS-03
Mounting parts kit (mounting prism, mounting plate, 2.5 mm hex key)
Cable for charging the optical sensor
Electronic target model WT-01
Electronic target control unit model WTC-01
Electronic target control unit interface cable
Electronic target interface cable
USB flash drive with software and drivers
User guide

The SCATT WS1 set includes:

Electronic target:

Electronic Target - (Model: WT-01) used in place of the standard target (hung on the wall, mounted on a bullet trap, or on a camera tripod), connected to the control unit without requiring a separate power supply. Insert a paper target—printed to match the desired discipline and the given distance—into the special slots on the frame of the electronic target. Electronic targets can be used at distances ranging from 5 to 10 meters, allowing you to train in different locations using the same electronic target frame.

Red and green LEDs at the top and bottom, respectively, are for timed training, such as in sport pistol. The target frame has a built-in wireless connection and can be used with wireless SCATT optical sensors. The electronic target is made of durable ABS plastic and can withstand shots from air rifles or air pistols. (But please do not shoot at the LEDs!)

Wireless optical sensor:

Wireless Optical Sensor (Model: WS-03) — when attached to a pistol or rifle, it records with high precision all movements of your weapon while aiming and at the moment the shot is fired. With the adjustable metal strap, designed for use with various barrel or cartridge diameters, you can attach the sensor to the barrel or the cartridge. The optical sensor automatically measures the distance to the electronic target. The software enables automatic calibration of the sensor relative to the weapon’s sights, eliminating the need to adjust the sights on the firearm. The optical sensor features a convenient mounting system that allows you to vary the sensor’s position on different firearms. The optical sensor has a two-way infrared connection to the electronic target.

The optical sensor allows for training at distances ranging from 4 m to 10 m.

The SCATT software enables automatic calibration of the sensor in relation to the firearm’s sighting axes, so there is no need to adjust the front sight or rear sight. The sensor also automatically compensates for any tilting of the firearm.

The SCATT WTS trigger sensor can be connected to the sensor’s USB port.

The sensor has a built-in battery and can be charged via your computer’s USB port. Charging takes approximately 1.5 hours. The battery life lasts approximately 30 hours (approximately 10,000 shots with an average aiming time of 10 seconds). When not in use, the sensor automatically switches to power-saving mode. Weight: 30g.

Electronic Disc Control Unit:

Electronic Disc Control Unit (Model: WTC-01) connected to a computer's USB port via a cable.

Mounting kit for the optical sensor:

Mounting kit for the optical sensor — includes an Allen wrench, mounting prism, and metal strap with a screw for attaching the sensor to shafts of various diameters and cross-sections. At the customer’s request, the kit can be expanded with additional mounting hardware; see Mounting Hardware for Optical Sensors.

Disc interface cable:

The interface cable that connects the electronic window to the control unit is 14 meters long.

Disc Control Interface Cable:

Disc Control Interface Cable, which connects the control unit to your computer's USB port, is 1.5 meters long.

Charging cable for the optical sensor:

The charging cable for the optical sensor, which is used to charge the WS-02 optical sensor via the computer's USB port, is 0.5 m long.

Software:

Software The SCATT Professional software includes all the necessary features for efficient training and a comprehensive analysis of shooting results. The results are displayed in both digital and graphical formats and can be saved to the hard drive for further analysis (bullet trajectory, shots, and graphs, etc.).

You can find more details about this model here:

SCATT MX-02 review by Tony Chow
SCATT MX-02 for High Power

Optional Accessories (not included in the basic set)

SCATT MX Series Carrying Case
Mounts (for attaching the optical sensor to the firearm)

If you are having trouble choosing the right SCATT simulator model, we recommend using the following comparison chart: Comparison chart of our SCATT simulators on the SCATT Systems page.

Additional information

Weight	1,25 kg